真空钎焊炉

设备用途及原理

 　 真空钎焊炉主要应用于航空部件、汽车部件、电子通信部件、家用电器、换热器以及各种散热器的铝钎焊、铜钎焊、不锈钢钎焊。

     由于在真空状态下加热可以去除工件表面油脂及氧化膜等，因而零件表面光亮度高，且无需钎剂，无需焊后清洗。

 真空钎焊炉分立式和卧式两种。根据炉温高低和客户的工艺要求，采用石墨或钼或钨作发热体及隔热屏。发热体可分成多区布置，各区独立控温，可编程PID调节。炉膛可整体移出，便于维护。配备充气装置、可向炉内充入保护性气体或工作气体，充气流量可调。配备内循环冷却装置，可加速炉内物料冷却，缩短工作周期，利于提高产品质量和工作效率。

Applicaiton and Principles

 Vacuum brazing furnace is principally adopted in aerospace devices, vehicle components, electronic communicating devices, home appliances, heat exchanger and Al brazing, Cu brazing and stainless-steel brazing of various heat radiators.

 It can remove the grease and oxidized membrane over the work piece with being heated under vacuum, and thus these work pieces have high brightness over their surface, and no need for brazing flux and cleaning after brazing.

 Vacuum brazing furnace has two types, vertical type and horizontal type. Based on the furnace temperature and process requirements from clients, it is adopted with graphite or molybdenum or tungsten as heating elements and heat insulating screen. Heating elements can be distributed among multiple districts, and each district can control temperature independently, and programmable PID regulation. Furnace hearth can be entirely removed out, convenient for maintenance. It is equipped with gas filling device, filling furnace with shielding gas or working gas, and its flow can be regulated.

  This furnace is equipped with internal-circulation cooling device, accelerating the speed of cooling down materials in furnace, shortening working period, and beneficial for improving product quality and performing efficiency.

设备主要技术参数Principle Technical Parameters

以下是设备产品技术参数，部分数据会随着产品创新改进，最新数据请联系我们:

Product technical parameters of equipment are presented as below, and partial of these data will be updated as the product innovation, please contact us if any latest data:

以上为标准配置，可根据客户要求进行调整。

It is standard configuration above, and can be adjusted according to the demand from customers.